![]() ![]() A good idea may be to use different printing speeds for each part of the object: the optimum speed for the outside is not the same as for the inside, of course. On the one hand, printing with a high temperature we’ll get better adhesion between layers, less clogging, and possibility of a higher printing speed. Temperature is one of the most important factors to bear in mind. Below this diameter, the printer will not be able to print, no matter how hard you try. Note that the nozzle through which the molten filament exits has a specific diameter. in the design: If your design has small parts that may suffer during printing, such as the legs of an insect that must rest on the printing plate, include discs around the fine parts in your design. Support material is something to avoid, because no matter how well we remove it, it will leave marks on the piece. Now, however, the PLA filament is used much more, because in addition to being biodegradable, it is easier to print: you do not need a heated bed, it suffers less warping or deformation, and it is less sensitive to temperature, air currents, etc. A few years ago it was the most widely used material for 3D printing. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |